DTC P1A06: Vehicle Mode Signal
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P1A06 - VEHICLE MODE SIGNAL
| Description: | The transaxle control module (TCM) continuously monitors the controller area network (CAN) for a vehicle mode message from the powertrain control module (PCM). This DTC sets when the received message does not match the actual vehicle mode. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TZ . | ||