DTC P0A23: Generator Torque Sensor Circuit Range/Performance
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P0A23 - GENERATOR TORQUE SENSOR CIRCUIT RANGE/PERFORMANCE
| Description: | The powertrain control module (PCM) checks the amount of the generator motor torque delivered, by monitoring the frequency of the torque of generator AC (TGAC) signal. This DTC indicates the TGAC signal is out of expected range. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the PCM GTQ_CMD parameter identification (PID). The PID value should be 0 Nm (0 lb ft) in PARK or NEUTRAL if the brake pedal is not applied. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TC . | ||