DTC P0351: Ignition Coil A Primary/Secondary Circuit
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P0351 - IGNITION COIL A PRIMARY/SECONDARY CIRCUIT
| Description: | Each ignition primary circuit is continuously monitored. The test fails when the powertrain control module (PCM) does not receive a valid ignition diagnostic monitor (IDM) pulse signal from the ignition module (integrated in the PCM). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | When checking functionality of the coil driver circuit, crank the engine using the engine cranking diagnostic mode. Refer to DIAGNOSTIC MODES . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST JF . | ||