LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2028 (Safety Belt System) >> Diagnosis And Testing >> Safety Belt System >> Component Test >> Functional Test - Safety Belt Retractor

Functional Test - Safety Belt Retractor

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt retractor must be freely operational for extraction and retraction of the safety belt webbing between full extension and in-vehicle stowed positions.

  1. Extract and retract the safety belt between the full extension and stowed positions.
  2. Verify the safety belt retractor operates without excessive effort or binding.
  3. Install a new safety belt retractor if any concern is found or the complaint has been verified.
scientia non olet · About LEMON Manuals