LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2027 (Sunroof - Roof Opening Panel) >> Removal And Installation >> Roof Opening Panel Idler Track Mechanism >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the roof opening panel sliding glass. For additional information, refer to ROOF OPENING PANEL GLASS - FRONT SLIDING .
  2. Carefully slide the idler link forward and out of the front of the track.
    Fig 1: Sliding Idler Link Forward And Out Of Front Of Track
    G06286099Courtesy of FORD MOTOR CO.
  3. NOTE: Make sure the idler mechanism guide shoes are installed in the track and aligned correctly during installation. The guide shoes cannot be serviced separately.
  4. To install, reverse the removal procedure.