Pinpoint Test F: The Roof Opening Panel Does Not Open or Close in the VENT Position: Notes
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The roof opening panel motor must be initialized whenever the roof opening sliding glass panel motor has been removed from the roof opening panel system, the roof opening panel module assembly has been removed from the vehicle, a new roof opening sliding glass panel motor has been installed or a new roof opening panel module assembly has been installed. Refer to ROOF OPENING PANEL MOTOR INITIALIZATION .
Refer to SYSTEM WIRING DIAGRAMS for Edge or SYSTEM WIRING DIAGRAMS for MKX for schematic and connector information.