Normal Operation
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
When the roof opening panel glass is completely closed, it is flush with the roof panel and correctly sealed. When the roof opening panel glass is in the VENT position, the leading edge of the glass panel should contact the primary seal.
This pinpoint test is intended to diagnose the following:
- Damaged or poorly fitting roof opening panel primary seal
- Damaged or poorly fitting roof opening panel fixed glass front seal
- Damaged or poorly fitting roof opening panel front trim panel seal
- Damaged or poorly fitting roof opening panel side trim panel seal
- Damaged or poorly fitting roof opening panel fixed glass side seal
- Damaged or poorly fitting deflector assembly