Roof Opening Panel Shade
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The roof opening panel power shade is equipped with a one-touch open feature. When the roof opening panel control switch is pressed and released, the shade panels will automatically move to the full OPEN position. When the roof opening panel control switch is pulled and released, the shade panels will automatically close to the safety stop position (approximately 280 mm (11.023 in) from the fully CLOSED position). To fully close the shade panels from the safety stop position, pull and hold the roof opening panel control switch.