Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Edge

Remove the headlamp switch. For additional information, refer to EXTERIOR LIGHTING .
Remove the steering column opening trim panel. For additional information, refer to Instrument Panel - Exploded View in INSTRUMENT PANEL AND CONSOLE .
Position aside the side demister hose.
Disconnect the instrument panel dimmer switch electrical connector.

NOTE: The 3 screws are accessed by reaching through the side opening in the instrument panel and the opening under the steering column using a size T-20 torx® tool.

Remove the 3 screws and the instrument panel dimmer switch mounting bracket.
Release the tabs and remove the instrument panel dimmer switch from the bracket.
MKX
Remove the instrument panel side finish panel.

NOTE: The headlamp switch assembly is removed by pushing from behind.

Release the tabs and remove the headlamp switch assembly.
- Disconnect the electrical connectors.
Release the tabs and remove the instrument panel dimmer switch.
All vehicles
To install, reverse the removal procedure.