LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2017 (HVAC - Climate Control System) >> Removal And Installation >> Register - Passenger Side, MKX >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disengage the 6 clips and remove the RH instrument panel finish panel.
  2. Remove the 4 passenger side register screws and the passenger side register.
  3. To install, reverse the removal procedure.