Removal and Installation
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Passenger side register shown, driver side similar.
- Working through the register vein openings, insert a suitable hook shaped pick behind each of the 4 register clips while gently pulling the register rearward with the hook to disengage the clip.
- Remove the driver or passenger side instrument panel register.
- To install, reverse the removal procedure.
NOTE:
Do not pry on the outer register trim bezel. The clips on the outer register trim bezel break if pried on to remove the register.