LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2017 (HVAC - Climate Control System) >> Removal And Installation >> Heating Ventilation Air Conditioning (HVAC) Module - MKX >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the 4 HVAC module screws.
  3. Remove the HVAC module.
    4. NOTE: Be sure the HVAC module spacers are correctly positioned before installing the HVAC module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals