LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2017 (HVAC - Climate Control System) >> Removal And Installation >> Heating Ventilation Air Conditioning (HVAC) Module - Edge >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable tool, gently pry out the upper center instrument panel finish panel to disengage the clips and remove the panel.
    • Disconnect the electrical connectors.
  2. Remove the 4 HVAC module screws.
  3. Remove the HVAC module.
    4. NOTE: Be sure the HVAC module spacers are correctly positioned before installing the HVAC module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals