LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2007 (Automatic Transmission - Automatic Transaxle/Transmission - External Controls) >> Diagnosis And Testing >> External Controls >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
  3. If an obvious cause for an observed or reported concern is found, correct the cause before proceeding to the next step.
  4. If the concern is not visually evident, verify the symptom. GO to SYMPTOM CHART - EXTERNAL CONTROLS  or GO to SYMPTOM CHART - NVH .
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Transmission selector lever cable
    • Manual control lever
    • Selector lever or selector lever knob
    • Selector lever slider bunching or binding
    • Smart Junction Box (SJB)
    • Fuse 5 (10A)
    • Connections
    • Wiring harness
    • Brake Pedal Position (BPP) fuse 71 (10A)
    • BPP  switch
    • Brake Shift Interlock Actuator (BSIA)
    • Transmission Control Switch (TCS)