LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2006 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Keyless Entry Keypad >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper access plug.
  2. Using a suitable tool (such as a long, flat-blade screwdriver), through the upper access hole, release the rear keyless entry keypad retaining clip and position the keyless entry keypad aside.
  3. Remove the keyless entry keypad.
    • Disconnect the electrical connector.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals