Wiper Motor - Rear Window: Installation
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Position the rear wiper motor on the liftgate and install the 3 rear wiper motor screws.
- Tighten to 11 Nm (97 lb-in).
- Connect the rear wiper motor electrical connector.
- Install the liftgate trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Install the rear wiper pivot arm. For additional information, refer to WIPER PIVOT ARM - REAR .