Wiper Activated Headlamps (If Equipped with Autolamp System)
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The SJB sends a voltage signal to the wiper motor module in order to monitor the status of the wipers. When the headlamp control switch is in the AUTOLAMP position and the wipers on for greater than 10 seconds, the SJB will activate the headlamps. When the SJB detects that the wipers have been turned off, the SJB will turn off the headlamps after 30 seconds.