LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1997 (Charging System (Battery, Mounting And Cables)) >> Removal And Installation >> Battery Tray >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. For additional information, refer to BATTERY .
  2. Remove the 3 battery cable harness locators from the battery tray.
  3. Remove the battery tray bolt.
    • To install, tighten to 9 Nm (80 lb-in).
  4. Remove the battery tray-to-bracket bolt.
    • To install, tighten to 9 Nm (80 lb-in).
  5. Remove the battery tray.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals