LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1993 (Hydraulic Brake System Actuation) >> Removal And Installation >> Brake Fluid Reservoir >> Material

Brake Fluid Reservoir: Material

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
Fig 1: Exploded View Of Brake Fluid Reservoir With Torque Specifications
G06505071Courtesy of FORD MOTOR CO.
PARTS DESCRIPTION CHART

Item Part Number Description
1 - Brake fluid level switch electrical connector (part of 14290)
2 2462 Brake fluid reservoir pin
3 2L074 Brake fluid reservoir seal (2 required)
4 2K478 Brake fluid reservoir
5 2C251 Brake fluid level switch