LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1992 (Rear Disc Brake System) >> Removal And Installation >> Rear Disc Brake Shield >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub. For additional information, refer to REAR SUSPENSION .
  2. Remove the parking brake shoe return spring bracket bolt and bracket.
    • To install, tighten to 5 Nm (44 lb-in).
  3. Remove the brake disc shield.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals