Torque Specification Chart
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION CHART
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Ball joint bolt and nut | 55 | 41 | - | ||
| Brake hose bracket bolt | 20 | - | 17 | ||
| Driveshaft-to-Power Transfer Unit (PTU) output flange bolts | 70 | 52 | - | ||
| Fill plug | 20 | - | 17 | ||
| Intermediate and halfshaft assembly bolts | 40 | 30 | - | ||
| Pinion flange nut(1) | - | - | - | ||
| PTU cover bolts | 32 | 24 | - | ||
| PTU-to-support bracket bolts | 70 | 52 | - | ||
| PTU-to-transaxle bolts | 90 | 66 | - | ||
| Roll restrictor bracket-to-transmission bolts | 90 | 66 | - | ||
| Roll restrictor shield | 11 | - | 7 | ||
| Roll restrictor through bolt (transmission side) | 90 | 66 | - | ||
| Roll restrictor through bolt (subframe side) | 103 | 76 | - | ||
| Stabilizer bar link nut | 90 | 66 | - | ||
| Wheel hub nut(1) | - | - | - | ||
|
|||||