LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1981 (Exterior Lighting System) >> Diagnosis And Testing >> Daytime Running Lamps (DRL) >> Principles of Operation

Principles of Operation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Smart Junction Box (SJB) is also known as the Generic Electronic Module (GEM).

The SJB  can be configured to turn the Daytime Running Lamps (DRL) on for this vehicle. Refer to MODULE CONFIGURATION for information on this programmable parameter.

The SJB  controls the DRL  by using various inputs to determine whether or not the DRL  should be illuminated. These inputs include:

When the DRL  is active, the SJB  provides a Pulse Width Modulated (PWM) voltage to the low beam headlamps. This illuminates the headlamps at a reduced intensity.