DTC Charts
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
SMART JUNCTION BOX (SJB) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B106E | Solid State Driver Disabled Due to Short Circuit | GO to PINPOINT TEST F . |
| B106F | Module Disabled Due to External Fault | GO to PINPOINT TEST F . |
| B1317 | Battery Voltage High | GO to PINPOINT TEST G . |
| B1318 | Battery Voltage Low | GO to PINPOINT TEST H . |
| B2477 | Module Configuration Failure | REFER to MODULE CONFIGURATION . |
| B2A21 | One or More Configuration Files Missing or Corrupt | CONFIGURE the SJB . REFER to MODULE CONFIGURATION to carry out Programmable Module Installation (PMI). |
| P062F | Internal Control Module EEPROM Error | INSTALL a new SJB . REFER to SMART JUNCTION BOX (SJB) . |
| U0155 | Lost Communication With Instrument Panel Cluster (IC) Control Module | GO to PINPOINT TEST I . |
| U2050 | No Application Present | CONFIGURE the SJB . REFER to MODULE CONFIGURATION . CLEAR the DTCs. REPEAT the self-test. If DTC U2050 is retrieved again, INSTALL a new SJB . REFER to SMART JUNCTION BOX (SJB) . TEST the system for normal operation. |
| All other DTCs | - | REFER to DIAGNOSTIC TROUBLE CODE (DTC) CHART . |