LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1975 (Supplemental Restraint System) >> Diagnosis And Testing >> Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Pinpoint Test - Supplemental Restraint System (SRS) >> Pinpoint Test R: DTC B2792 >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The Restraints Control Module (RCM) monitors all the deployable devices for a cross link between the circuits of another deployable device. If the RCM  detects a short between the circuits of the deployable devices, it will store DTC B2792 in memory and send a message to the Instrument Cluster (IC) module to illuminate the air bag warning indicator.

FAULT TRIGGER CONDITION CHART

Fault PIDs (1) Description Fault Trigger Condition
2792_8_OD and 2792_8_CM A-B or A-C pillar Curtain, Passenger Side When the Restraints Control Module (RCM) detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_9_OD and 2792_9_CM A-B or A-C pillar Curtain, Driver Side When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_12_OD and 2792_12_CM Side Airbag Passenger When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_13_OD and 2792_13_CM Side Airbag Driver When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_26_OD and 2792_26_CM Pretensioner Passenger When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_27_OD and 2792_27_CM Pretensioner Driver When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_28_OD and 2792_28_CM Airbag Passenger Front Loop #2 When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_29_OD and 2792_29_CM Airbag Passenger Front Loop #1 When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_30_OD and 2792_30_CM Airbag Driver Front Loop #2 When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
2792_31_OD and 2792_31_CM Airbag Driver Front Loop #1 When the RCM  detects a short between the circuits of 2 deployable devices, a fault will be indicated.
(1) Fault PIDs that end in OD indicate an on-demand status and are associated with on-demand DTC B2792. Fault PIDs that end in CM indicate continuous memory status and are associated with continuous DTC B2792.

This pinpoint test is intended to diagnose the following: