Normal Operation
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The Restraints Control Module (RCM) monitors the passenger safety belt buckle switch circuits for faults. If the RCM detects a current out of range fault, it will store DTC B2439 in memory and send a message to the Instrument Cluster (IC) module to illuminate the air bag warning indicator.
- DTC B2439 (Passengers Seat Belt Buckle Switch Resistance Out of Range) - If the RCM detects a current out of range between buckled and unbuckled on the passenger safety belt buckle switch, it will set this DTC.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Passenger safety belt buckle switch
- RCM