Normal Operation
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The Restraints Control Module (RCM) monitors the driver safety belt buckle switch circuits for faults. If the RCM detects a current out of range fault, it will store DTC B2435 in memory and send a message to the Instrument Cluster (IC) module to illuminate the air bag warning indicator.
- DTC B2435 (Drivers Seat Belt Buckle Switch Resistance Out of Range) - If the RCM detects a current out of range between buckled and unbuckled on the driver safety belt buckle switch, it will set this DTC.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Driver safety belt buckle assembly
- RCM