LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1974 (Rear Suspension System) >> Removal And Installation >> Wheel Studs >> Removal

Wheel Studs: Removal

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and wheel hub. For additional information, refer to WHEEL BEARING AND WHEEL HUB .
  2. Using a suitable press, remove the wheel stud from the wheel hub.
    • Discard the wheel stud.