Wheel Bearing and Wheel Hub: Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Using the Wheel Hub Bearing Cup Installer and a suitable press, install the wheel bearing into the wheel knuckle.

Fig 1: Identifying Wheel Hub Bearing Cup Installer
Courtesy of FORD MOTOR CO.
Install the snap ring.
Using the Wheel Hub Bearing Cup Installer, Step Plate and a suitable press, install the wheel hub into the wheel bearing.

Fig 2: Identifying Step Plate And Wheel Hub Bearing Cup Installer
Courtesy of FORD MOTOR CO.
Install the wheel knuckle. For additional information, refer to WHEEL KNUCKLE .