System Airflow Description - Dual Automatic Temperature Control (DATC) System: Auto
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
When AUTO is selected:
- the temperature control setting is manually set to the desired setting.
- the air inlet door actuator is automatically controlled by the HVAC module - DATC , based on the temperature setting.
- the mode door actuators are automatically controlled by the HVAC module - DATC based on the temperature setting.
- the A/C compressor is automatically controlled by the HVAC module - DATC based on the temperature setting.
- the blower motor is ON. The blower motor speed is automatically controlled by the HVAC module - DATC based on the temperature setting, but can be manually overridden.