LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1966 (Engine System - General Information) >> General Procedures >> Camshaft Surface Inspection

Camshaft Surface Inspection

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
    Fig 1: Inspecting Camshaft Lobes For Pitting Or Damage In Contact Area
    G06064055Courtesy of FORD MOTOR CO.