LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1965 (Brake System - General Information) >> General Procedures >> Brake System Inspection >> Brake Booster

Brake Booster

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the brake booster for excessive corrosion or damage. Inspect the vacuum hoses for leaks and kinks.
    • Install a new brake booster if signs of excessive corrosion or damage is found. For additional information, refer to POWER BRAKE ACTUATION .
    • Repair or replace vacuum hoses as necessary.
    • To check for correct brake booster operation, refer to COMPONENT TESTS .