Special Tool(s)
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL REFERENCE
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool. |
Prior to carrying out the flow test, the following items should be checked:
- Know and understand the customer's concerns.
- Verify the concern by operating the vehicle.
- Check the transmission fluid level and condition.
- Check for non-factory-installed items and verify correct installation.
- Check the selector lever linkage adjustments.
- Check TSB messages for vehicle concerns.
- Carry out both Key ON Engine OFF (KOEO) and Key ON Engine Running (KOER) Self Test.
- Record all DTCs.