LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1959 (Automatic Transmission - Automatic Transaxle/Transmission) >> Diagnosis And Testing >> Diagnosis By Symptom >> Diagnostic Routines >> Shift Concerns: Harsh 4-3 Shift (Automatic)

Shift Concerns: Harsh 4-3 Shift (Automatic)

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT REFERENCE

Possible Component Reference/Action
247 - ELECTRICAL ROUTINE 
Solenoid Body   
  • Incorrect solenoid body strategy data stored in the PCM
  • Verify solenoid body strategy data stored in the PCM, download new identification and strategy as necessary. Refer to SOLENOID BODY STRATEGY .
347 - HYDRAULIC/MECHANICAL ROUTINE 
Main Control Valve Body   
  • Bolts out of torque specification
  • Tighten bolts to specification.
  • Gaskets and separator plate - damaged, off location
  • Inspect for damage. Install new as required.
  • O/D  regulator and boost valves, springs, clips - loose, stuck, binding, missing, misassembled
  • Inspect for damage. Repair or install new as required.
  • Direct regulator and boost valves, springs, clips - loose, stuck, binding, missing, misassembled, clutch failed off
  • Inspect for damage. Repair or install new as required.
  • Shift Solenoid B (SSB) or Shift Solenoid D (SSD) not functioning correctly
O/D Clutch Assembly   
  • Seals - damaged
  • Inspect for damage. Install new as required.
  • Piston - damaged
  • Inspect for damage. Install new as required.
  • Friction - damaged, worn
  • Inspect for damage. Install new as required.
  • Cylinder hub - damaged
  • Inspect for damage. Install new as required.
  • Return spring assembly - damaged
  • Inspect for damage. Install new as required.
Direct Clutch Assembly   
  • Seals - damaged
  • Inspect for damage. Install new as required.
  • Piston - damaged
  • Inspect for damage. Install new as required.
  • Friction - damaged, worn
  • Inspect for damage. Install new as required.
  • Cylinder hub - damaged
  • Inspect for damage. Install new as required.
  • Return spring assembly - damaged
  • Inspect for damage. Install new as required.