LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1959 (Automatic Transmission - Automatic Transaxle/Transmission) >> Description And Operation >> Transaxle Electronic Control System >> Brake Pedal Position (BPP) Switch

Brake Pedal Position (BPP) Switch

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The Brake Pedal Position (BPP) switch tells the PCM when the brakes are applied. The BPP switch closes when the brakes are applied and opens when they are released. The BPP signal is used for brake shift interlock actuation.

scientia non olet · About LEMON Manuals