LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1957 (Engine Mechanical - 3.5L) >> Installation >> Valve Spring, Retainer and Seal >> Material

Valve Spring, Retainer and Seal: Material

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION

Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent		 WSS-M2C930-A
    NOTE: Lubricate the valve stem seal with clean engine oil prior to installation.
    Fig 1: Identifying Valve Stem Oil Seal Installer
    G06062541Courtesy of FORD MOTOR CO.
  1. Using the Valve Stem Oil Seal Installer, install a new valve stem seal.
  2. Using the Valve Spring Compressors, install the valve spring, retainer and key.
    Fig 2: Identifying Valve Spring Compressors
    G06062293Courtesy of FORD MOTOR CO.
  3. Install the valve tappets. For additional information, refer to VALVE TAPPETS .
scientia non olet · About LEMON Manuals