Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
Remove the accessory drive belt and the power steering belt. For additional information, refer to ACCESSORY DRIVE .
Using the Strap Wrench, remove the crankshaft pulley bolt and washer.
- Discard the bolt.
  
  Fig 1: Locating Crankshaft Bolt And Washer
  Courtesy of FORD MOTOR CO.
Using the 3 Jaw Puller, remove the crankshaft pulley.

Fig 2: Removing Crankshaft Pulley
Courtesy of FORD MOTOR CO.