LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1953 (Engine Emission Control System) >> Removal And Installation >> Crankcase Ventilation Tube >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

LH crankcase ventilation tube 

  1. Disconnect the LH crankcase ventilation tube-to-Air Cleaner (ACL) outlet pipe quick connect coupling. For additional information, refer to GENERAL PROCEDURES article.
  2. Disconnect the LH crankcase ventilation tube-to-valve cover fitting quick connect coupling and remove the tube. For additional information, refer to GENERAL PROCEDURES article.

    3. RH crankcase ventilation tube 

  3. Disconnect the RH crankcase ventilation tube-to-PCV valve quick connect coupling. For additional information, refer to GENERAL PROCEDURES article.
  4. Disconnect the RH crankcase ventilation tube-to-Throttle Body (TB) spacer quick connect coupling and remove the tube. For additional information, refer to GENERAL PROCEDURES article.

    5. RH and LH crankcase ventilation tubes 

  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals