LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1928 (HVAC - Climate Control System) >> Removal & Installation >> In-Vehicle Temperature Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL & CONSOLE article.
  2. Remove the 2 in-vehicle temperature sensor screws.
  3. Disconnect the in-vehicle temperature sensor aspirator hose.
  4. Disconnect the in-vehicle temperature sensor electrical connector.
  5. Remove the in-vehicle temperature sensor.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals