Seat Cushion - Front: Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Driver seat shown in illustration. For disassembly and assembly of the passenger seat cushion, refer to Occupant Classification Sensor (OCS) procedure in REMOVAL AND INSTALLATION
.
| Item | Part Number | Description |
|---|---|---|
| 1 | 62900 RH/ 62901 LH | Cushion trim cover |
| 2 | 632A22 RH/ 632A23 LH | Cushion foam pad |
| 3 | - | Lumbar control switch electrical connector (part of 14A699, if equipped) |
| 4 | 14A706/ 611B46 | Lumbar control switch bezel and retainer assembly (if equipped) |
| 5 | - | Lumbar control switch (if equipped) |
| 6 | - | Cushion heater mat electrical connector (part of 14D696) (if equipped) |
| 7 | 14D696 | Cushion heater mat (if equipped) |
| 8 | - | Pushpins (2 required) |
| 9 | - | Mat |
| 10 | 61202 RH/ 61203 LH | Safety belt buckle |
| 11 | - | Safety belt buckle nut |
| 12 | - | Safety belt buckle electrical connector |
| 13 | - | Pivot bolt |
| 14 | 62616 | Recliner-to-backrest bolt (2 required) |
| 15 | - | Recliner-to-seat track bolt (2 required) |
| 16 | - | Power recliner electrical connector (part of 14A699) (if equipped) |
| 17 | 62648 RH/ 62649 LH | Recliner (power shown in illustration, if equipped) |
| 18 | - | Seat track-to-cushion frame bolt (4 required) |
| 19 | - | Seat position sensor electrical connector (3 required) (driver only, part of 14A699) |
| 20 | 61710/61711 | Seat track (power shown in illustration) |
| 21 | 13C789 | Driver Seat Module (DSM) (if equipped) |
| 22 | - | DSM electrical connector (part of 14A699) (if equipped) |
| 23 | - | Nut (2 required) |
| 24 | - | Bolt |
| 25 | 63100 | Cushion frame |