Memory Seat

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

The memory seat system allows the recall of previously stored positions of the driver seat using the Remote Keyless Entry (RKE) transmitter or the memory SET/recall switch located on the door panel. This system allows automatic positioning of the driver seat, power outside rear view mirrors and power adjustable pedals (if equipped) to 2 programmable positions. Memory positions can be stored at any time. A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL and the ignition switch is not in START. A memory recall in progress will not be affected by moving the ignition switch to START or by moving the gearshift lever out of PARK or NEUTRAL. For information on programming memory positions or recalling a stored memory position, refer to Memory Position Programming .