Safety Belt Warning System
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The conditions of operation for the driver and/or passenger safety belt warning indicator and chime are as follows:
- If the driver and/or passenger safety belt is not buckled with the ignition ON, then the safety belt warning indicator illuminates for 1 to 2 minutes and the warning chime sounds for 4 to 8 seconds.
- If the driver and/or passenger safety belt is buckled while the warning indicator is illuminated and the warning chime is sounding, then the indicator and chime will turn off.
- If the driver and/or passenger safety belt is buckled before the ignition is in the ON position, the safety belt warning indicator and chime will remain off.