LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1867 (Instrument Cluster Illumination And Panel Illumination) >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT CLUSTER FINISH PANEL .
    2. NOTE: The instrument panel dimmer switch is removed by releasing the tabs and pulling from behind.
  2. Release the tabs and remove the instrument panel dimmer switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals