Inertia Fuel Shutoff (IFS) Switch
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | 14A464 | Inertia Fuel Shutoff (IFS) switch electrical connector |
| 2 | W504168 | IFS mounting bolts (2 required) |
| 3 | 9341 | IFS switch |
- Remove the RH lower A-pillar trim panel. For additional information, refer to A-PILLAR TRIM PANEL .
- Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.
- Remove the 2 bolts and the IFS switch.
- To install, tighten to 2 Nm (18 lb-in).
- To install, reverse the removal procedure.