LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1839 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Liftgate Release Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate trim panel. For additional information, refer to LIFTGATE TRIM PANEL .
  2. Disconnect the release switch electrical connector.
  3. Press the tab and remove the liftgate release switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals