LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1839 (Handles, Locks, Latches And Entry Systems) >> Description And Operation >> Handles, Locks, Latches and Entry Systems >> Remote Keyless Entry (RKE)

Remote Keyless Entry (RKE)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The Remote Keyless Entry (RKE) system uses an Integrated Keyhead Transmitter (IKT). The IKT  incorporates both the Passive Anti-Theft System (PATS) functions and the RKE  transmitter functions in a single device.

The RKE  transmitter is programmed automatically during PATS  programming. During PATS  programming, the Instrument Cluster (IC) obtains the Transmitter Identification Code (TIC) from the IKT  and sends the TIC  data over the Medium Speed Controller Area Network (MS-CAN) to the SJB  .

The SJB  accepts programming of up to 4 IKTs  . In addition to the IKTs  , 4 conventional keyfobs can also be programmed to the vehicle if requested by the customer. Refer to Key Programming Using Two Programmed Keys or Integrated Keyhead Transmitter (IKT) Key Programming Using Diagnostic Equipment in INTEGRATED KEYHEAD TRANSMITTER (IKT) KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT or ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) - HYBRIDINTEGRATED KEYHEAD TRANSMITTER (IKT) KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT for IKT  programming information. Refer to REMOTE KEYLESS ENTRY (RKE) TRANSMITTER PROGRAMMING  for keyfob programming information.

Fig 1: Identifying Remote Keyless Entry
G06099805Courtesy of FORD MOTOR CO.

The IKT  initiates the following electronic system functions:

The IKT  has a normal operating range of 10 m (33 ft).