LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1838 (Information System And Entertainment System) >> Removal And Installation >> Subwoofer Amplifier >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the RH rear quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  3. Disconnect the subwoofer amplifier electrical connector.
  4. Remove the 4 screws and the subwoofer amplifier.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals