LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1824 (Battery, Battery Mounting & Battery Cables) >> Diagnosis And Testing >> Inspection And Verification

Inspection And Verification

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Battery
    • Battery mounting
    • Battery cables
    • Battery posts
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the fault is not visually evident, GO to PINPOINT TEST A  in the Pinpoint Test procedure.