LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1810 (Power Transfer Unit (PTU)) >> In-Vehicle Repair >> Transfer Case Vent >> Removal

Transfer Case Vent: Removal

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure applies to vehicles equipped with manual transaxles.
  1. Remove the Power Transfer Unit (PTU). For additional information, refer to POWER TRANSFER UNIT (PTU) .
  2. Using a slide hammer with a suitable 3 jaw puller attachment, remove the PTU  tube.
scientia non olet · About LEMON Manuals