LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1809 (Information Center - Instrumentation, Message Center And Warning Chimes) >> Removal And Installation >> Instrument Cluster (IC) Lens >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Instrument Cluster (IC). For additional information, refer to INSTRUMENT CLUSTER (IC) .
  2. Remove the 2 IC  lens and mask assembly screws.
  3. Release the 10 tabs on the lens and mask assembly and remove the lens and mask assembly from the IC  .
    Fig 1: Locating Lens Tabs
    G06098903Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals