Brake Master Cylinder
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
During normal operation of the brake master cylinder, the fluid level in the brake master cylinder reservoir will fall during brake application and rise during release. The net fluid level (such as after brake application and release) will remain unchanged. Fluid level will decrease with pad wear.
NOTE:
A trace of brake fluid will exist on the booster shell below the master cylinder mounting flange. This results from the normal lubricating action of the master cylinder bore and seal.
- Inspect the brake master cylinder for fluid leaks.
- Install a new master cylinder or brake fluid reservoir if signs of excessive leaking are present. For additional information, refer to HYDRAULIC BRAKE ACTUATION .
- To check for correct brake master cylinder operation, refer to COMPONENT TESTS .